0
No, a 10A fuse should not replace a 5A fuse. Fuses are designed to protect circuits by breaking the connection when the current exceeds a specified limit; using a higher-rated fuse can allow too much current to flow, potentially damaging the circuit or causing a fire. Always replace a fuse with one that matches the original rating for safety.
What else can I help you with?
Can you replace a 10 amp fuse with 5 amp?
You could on a temporary basis, but it would blow as soon as the aggregate current on the circuit reached 5A instead of 10A. Replacing a higher value fuse with a lower fuse is not a safety hazard, but the other way around would be a hazard if you replaced a 5A with a 10 A.
Can you replace a 5 amp with a 10 amp?
You could on a temporary basis, but it would blow as soon as the aggregate current on the circuit reached 5A instead of 10A. Replacing a higher value fuse with a lower fuse is not a safety hazard, but the other way around would be a hazard if you replaced a 5A with a 10 A.
Cuánto es 5a x 5a?
(5a)^2 or a^2+10a+25
What is five a multiplied by a plus two?
5a(a+2) = 5a^2 + 10a
How do you factorise 10a-5ab?
15
What does 2a plus 5a plus 3a equal?
2a + 5a + 3a = 10a
5a equals -5a plus 5?
5a = -5a + 5Add 5a to each side:10a = 5Divide each side by 10:a = 5/10 = 1/2
What fuse do use to fix the heater?
depends on your car look at the fuse box cover. locate the blown fuse on the diagram and there should be some numbers e.g. 5A, 10A, 15A, or 20A. once you have this go to your local car store and by a 5A or whatever fuse. even better... take the blown one out and take it in to the store...
What happens when a 250V 2500W water heater is connected to mains supply with a 5A fuse?
When a 250V, 2500W water heater is connected to a mains supply with a 5A fuse, the fuse will likely blow. This is because the heater draws approximately 10A (calculated by dividing the power, 2500W, by the voltage, 250V), which exceeds the 5A rating of the fuse. As a result, the fuse will interrupt the circuit to prevent overheating or damage, preventing the water heater from operating.
Can you use a 125V 15A fuse to replace a 250V 10A fuse?
No, it is not safe to replace a 250V 10A fuse with a 125V 15A fuse. The voltage rating of the fuse must be equal to or greater than the system voltage, and the amperage rating must be equal to or lower than the rated current of the circuit. Using a lower voltage or higher amperage fuse can lead to safety hazards, including potential fire risks.
What is the answer to this equation 5a plus 3b plus 9b-10a?
It is not an equation but an algebraic expression that can be simplified to: 12b-5a
What is the product of (2a 9)(5a-6)?
If you mean: (2a+9)(5a-6) then it is 10a^2+33a-54
