0
What else can I help you with?
Does a faulty crank shaft sensor cause a car to shut off?
Yes it can.
Where is the oil pump drive on a 1998 Ford Ranger with a 4.0 efi engine?
On a 4.0 liter EFI , V6 engine , in a 1998 Ford Ranger : The camshaft position synchronizer located on the top of the engine , near the centerline , at the rear of the engine near the firewall , has a shaft from the bottom that drives the oil pump * From what I understand you can't see the synchronizer with the upper intake manifold installed
Where is the cam shaft position sensor on a 1997 Ford Aerostar?
On a 1997 Ford Aerostar : From what I have read , the cam shaft position sensor ( which is on top of the cam shaft position synchronizer ) on the 4.0 liter EFI V6 engine is on the top of the engine , near the center line , at the rear of the engine near the firewall * apparently you can't see it without the upper intake manifold being removed
What drives oil pump 2003 ranger 3.0?
I'm not a mechanic / technician but I was looking at ford parts . com ( no spaces ) and it shows : A drive shaft from the bottom of the ( engine camshaft synchronizer ) to the ( oil pump )
Where is the cam shaft sensor in a 1998 Ford Ranger V6 4.0?
I'm not a mechanic / technician but from what I have read the Ford 4.0 liter EFI , V6 engine has the cam shaft position sensor ( on top of the synchronizer ) located on the top of the engine , near the centerline , at the rear of the engine near the firewall ( apparently you can't see it without the upper intake manifold removed )
Does a faulty crank sensor or cam shaft sensor cause excessive oil use?
NO it will not. They have NOTHING to do with oil usage.
Need to find and replace the camshaft sensor on a 95 Ford Aerostar 3L?
IF it is the same as the 1997 3.0L, then remove the engine access cover inside the vehicle. It is atop a shaft called a synchronizer at the rear top of the engine. It is attached with two small bolts.
Does the a faulty cam shaft sensor turn on service engine soon?
Yes it could you should have your a check up done for your car.
What cause the engine to have a knocking noise on 3.0 liter Toyota Avalon?
Crank Shaft.
How safe is it to drive a vehicle when the drive shaft is broken or faulty?
never drive any vehicle with a worn universal joint, you may cause serious injury to yourself or other drivers when the drive shaft lets loose on the road
Can a 5 speed from a v6 camaro be used on a v8?
DONT DO IT...THE INPUT SHAFT IS DIFFERENT! You will need to use a transmission input shaft for a v8. It will cause engine failure if you dont!
2001 Ford Taurus after start up you hear chimes?
i had the same problem i believe. mine was a chirping sound that came from the engine compartment. the cause was a bad cam shaft synchronizer. if it sounds expensive,,,,its because it isSince we're not exactly sure what "Chimes" are being heard...Door ajar chimes are not at all uncommon due to a false door ajar warning.See "Related Questions" below for more
