1996 c60 truck if you turn steering quickly at low speeds vehicle shacks acts like drive train until you stop
slipping power steering belt , worn or loose .
A bad wheel hub searing can cause vibration on your steering. Loose or broken steering and suspension components can cause vibrations when accelerating, decelerating or changes in speed. Worn tie rod bushings, damaged struts or shocks are common causes of vibration. Drivetrain problems, such as a bad wheel bearing, damaged CV-joint (front-wheel-drive cars), a bent or imbalanced driveshaft (rear-wheel-drive cars) or missing chassis/drivetrain damper weights are all examples of speed-sensitive vibrations.
Worn or loose steering linkage or worm gear.
Vibration when applying brakes is most likely warped rotors. Another cause could be loose caliper bolts. The vibration while driving is most likely a tire issue ie (out of balance, broken belt in tire, bent rim). Other possible causes are loose/worn suspension and/or steering parts.
A faulty pump could be the cause of this problem. or a loose connection due to vibration.
Tires can be either out of balance or have a slipped belt and cause vibration in the steering wheel. Wheels can be bent and cause it. CV joints can be almost to the point of failure and cause it. Excessively loose steering components (ball joints, Rack, idler arm (if present), struts... Either the front or rear drive shafts could be out of balance most likely the front
No power steering fluid, broken pump, or broken lines.
Vibration when applying brakes is most likely warped rotors. Another cause could be loose caliper bolts. The vibration while driving is most likely a tire issue ie (out of balance, broken belt in tire, bent rim). Other possible causes are loose/worn suspension and/or steering parts.
Check for a loose power steering belt.
you loose control of steering cause your steering wheel locks up
Tire out of balance, worn suspension parts, defective or loose wheel bearing, loose lug-nuts, or worn steering parts.
Vibration when applying brakes is most likely warped rotors. Another cause could be loose caliper bolts.