No, you should not use Allison Transynd in place of Mercon LV. These two transmission fluids are designed for different specifications and applications. Using the wrong fluid can lead to poor performance, potential damage to the transmission, and may void any warranties. Always refer to your vehicle's owner manual for the correct fluid specification.
Use TranSynd licensed by Dextron 3 product
You didn't say if it was an auto or standard...however If it's a B500 Allison,you must use transynd, 740-746 Allison uses either atf or 30 weight engine oil, Standard transmission...use the 30 weight engine oil hope this helps
Mercon. Do not use Mercon V, as they are not interchangable. Use only Mercon.Mercon. Do not use Mercon V, as they are not interchangable. Use only Mercon.
For a 2005 Chevy pickup equipped with an Allison transmission, you should use Allison Transmission Fluid, specifically the TES 295 specification fluid. This is typically Allison's TranSynd fluid, which is designed to provide optimal performance and protection for the transmission. It's essential to avoid using other types of ATF, as they may not meet the specific requirements of the Allison transmission. Always check the owner's manual for the recommended fluid specifications.
one is for gm and mercon is ford now days they make a dexron mercon mix acceptable to both Dexron III and Mercon V have different specs. You should not use Dexron III in place of Mercon V.
No. The Transaxle in a 1988-2006 Ford Taurus must use MERCON V. Both the AX4N and AX4S transaxle can ONLY use MERCON V. The power steering system also utilizes the MERCON V Fluid. The Power Steering system can ONLY use MERCON V.MERCON V is the latest MERCON Specification. All MERCON Fluids have been discontinued and replaced with the new MERCON V standard.IMPORTANT: Systems requiring MERCON V ARE NOTbackwards compatible with MERCON fluid. Do NOT use MERCON fluid in a system designed for use with MERCON V Fluid.However, Systems requiring MERCON fluid, can use MERCON V fluid. Ford issued a TSB stating that MERCON V supersedes(and surpasses) all MERCON requirements.
Use Mercon only. Do NOT use Mercon V.
Mercon
Mercon
you can use mercon...
All 1998+ Transmissions Takes MERCON V. DO NOT USE MERCON/DEXRON III IT WILL DAMAGE YOUR TRANSMISSION.Depending on transmission work done in the past, 1996+ Transmission may take MERCON or MERCON V.If in doubt, use MERCON V.
No, you should not use Mercon V in place of SP-3 transmission fluid. Mercon V is a synthetic fluid designed for specific Ford transmissions, while SP-3 is typically used in certain Honda and Acura models. Using the wrong fluid can lead to improper shifting and potential damage to the transmission. Always refer to the vehicle's owner manual for the correct fluid specifications.