The clock will pop out of the dash with a small screw driver. Unplug the wiring harness. On the back of the clock is a small light bulb. Turn the slot in the back of the bulb 1/4 turn. Bulbs cost $2.00 - $5.00 dependig on the dealer. Very simple job.
You can replace the bulb without going to the dealership. Radio Shack sells the correct replacement (Part #7219 (272-1092C) 12V - 60mA) for about $1.50 for a two bulb pack. You have to unwind the wire leads from plastic holder. Remove the old bulb and slide the new one in through the holder. Rewind each lead around the hook on each side. These are also the same bulbs for the heat/AC back lights.
You have to replace the entire instrument cluster.
You have to replace the entire headlight assembly not just the cover.
You have to replace the entire assembly.
The wheel bearings are not really replaceable by themselves. This is because they are integrated into the hub assembly. So the answer is that you will have to replace the entire hub assembly to replace the bearings.
On older vehicles you replace the entire headlight. On the newer vehicles you just replace the bulb unless the headlight assembly is damaged.
No, the entire assembly needs to be replaced.
how to replace the headlight light assemble on a 2001 e320
You can change the front wheel bearings on your 2000 Buick Regal without replacing the entire hub assembly. You can change each individual wheel bearing, if you choose.
Easiest thing to do is lift the motor about 4" with a hoist, removing the entire mount bracket on both motor AND the Rack. Replace the mount without the brackets mounted, and install the entire assembly as one piece
You don't. Instead, you replace the entire assembly.
Are you asking how to replace the entire headlight assembly -OR- how to replace just the headlight bulb? Just the bulb.
Lenses are not replaceable on the Malibu, you have to replace the entire taillight assembly