NO.
Well, honey, the mixing ratio of kerosene and bitumen in MC 70 prime coat is typically around 1:1. But hey, you might want to check with your supplier or look at the specific product guidelines just to be sure. Can't have those roads falling apart now, can we?
petrolium is an oil.that is found underground. some other times we can call it iol. petrolium has a lot of energy.petrolium is a mixing of kerosene,gasoline, and heating oil.
The exhaust will stink of kerosene.
Cut-back bitumen uses solvent as the mixing medium where in Emulsion uses water to dilute bitumen for the purpose of tack-coating / road works
A mixture, homogeneous (ex.: brine) or heterogeneous (ex.: bitumen).
The use of asphalt cutbacks is not recommended because they are made by mixing asphalt with lighter oils such as kerosene or gasoline. Over time these solvents evaporate from the mixture, contaminating the environment.
Mixing styrofoam and gasoline will not create an adhesive. However, the combination can be highly flammable and dangerous as styrofoam can dissolve in gasoline, releasing toxic fumes. It is not recommended to mix these two substances.
your car will become a rocket but only for a while because the engine will probably brake.
The only thing wrong with doing this is that kerosene tends to smell a little more than lamp oil and will produce more smoke and soot. But it will burn in a lamp just like the more refined lamp oil.
Diesel fuel cannot be used to produce gasohol as gasohol is a blend of gasoline and ethanol. Diesel fuel is used in diesel engines while gasohol is typically used in gasoline engines. Mixing diesel fuel with ethanol to produce gasohol would not be compatible for engine operation.
I suppose you will get 2-phase liquid: antifreeze at the bottom and gasoline at the top.
Wine mixing is an alcoholic beverage produce by the fermentation.