You can change your 1986 305 cubic inch pickup engine from a carburetor to fuel injection. The problem with doing so is the cost. It might cost more to do the change than it would to purchase an engine.
B2600 has a carburetor system and B2600i has an injection system.
The 1992 S10 doesn't have a carburetor. It more than likely has TBI (Throttle Body Injection).
That truck doesn't have a carburetor. It has a throttle body fuel injection system.
No, a 2000 Ram has multi port fuel injection.
can some one tell me if you can change the gasket on the back of the injection pump on 1983 mazda diesel pickup with out any problems
with rivets
The 1987 Isuzu Pickup 1.9L was originally equipped with a 2 barrel Hitachi DCH340 series carburetor.
To adjust the carburetor float on a 1990 Isuzu pickup, first, remove the carburetor from the engine and detach the float bowl. Check the float height by inverting the carburetor and measuring the distance from the float to the gasket surface; it should typically be around 14-16 mm. If adjustment is needed, bend the float arm gently until the correct height is achieved. Reassemble the carburetor and reinstall it on the engine, ensuring all connections are secure.
no sir ,87 and 88 change out.
Follow the fuel line to the engine, it is either an in line filter or in the housing of the carburetor.
It would bolt in but you have two different fuel injection systems that won't interchange.
If your s-10 is fuel injected, you won't find a carburetor because it doesn't have one. We need to know what year and engine size your s-10 is to help you with more info.