No, you have to buy a wider tire.
205 is the width of your tire the 65 is an aspect ratio that determines how tall the tire is compared to the width
It usually can
The width of the contact patch of the tire on the road.
The width of the road.
To determine the width of a tire, you can look at the sidewall of the tire where the size information is usually printed. The width is typically indicated in millimeters and is the first number listed in the tire size. You can also measure the width of the tire using a ruler or tape measure if the size information is not visible.
A tire's section width (aka"cross section width") is the measurement of the tire's width from its inner sidewall to its outer sidewall (excluding any protective ribs, decorations or raised letters) at the widest point. This measurement is made without any load placed upon the tire. The rim the tire is mounted on affects this measurement. On a narrow rim the measurement would be "narrower" than if the same tire was mounted on a wide rim. The industry rule of thumb is that for every 1/2" change in rim width, the tire's section width will correspondingly change by approximately 2/10". For example: a tire in the P205/60R15 size is measured on a 6.0" wide wheel and this size tire has an approved rim width range from 5.5" to 7.5" wide. The tire has a section width of 8.23" (209mm) when mounted on a 6.0" wide wheel. If that tire were mounted on a rim: 5.5" - 8.03" cross section width 7.5" - 8.93" cross section width It's mainly important for (fender, frame)clearances, but a narrow rim should give a softer ride due to sidewall positioning, but less grip due to tread not less flat, more sidewall roll.
That is the tire profile or section width. The number is a metric figure standing for the width of the tire in millimeters.
265 on a tire is the width of the tire in mm
A 295 tire typically has a section width of approximately 295 millimeters, which is about 11.6 inches. This measurement refers to the width of the tire when mounted and inflated. The actual width may vary slightly based on the tire's specific design and the rim width it is mounted on.
"Contact" width is the tread with of a tire, not to be confused with sidewall width.
Depends on the size tire and the aspect ration of that tire.
A bicycle tire width chart provides information on the different tire widths available for bicycles. This includes the measurements of the tire width in millimeters or inches, recommended tire widths for specific types of riding, and compatibility with different rim sizes. It can help you choose the right tire width for your bike based on your riding preferences and needs.