Some years you can, some you can't.
That is the check engine light.
A flashing check engine light is an indication of an engine misfire.
A Dodge Ram will have a check engine light appear when the engine needs to be serviced. You can reset this light by following the directions in your manual or by having your mechanic do it.
If the light is not coming on when you turn on the ignition, check the bulb, it may be blown.
You will need to get the cause of the check engine light repaired.
You reset the check engine light with a scan tool after repairing the failure.
"Check Engine" light comes on when you turn ignition switch on and should go off when engine cranks.
Simply turn on the ignition but do not attempt to start the engine. If the light bulb is good you will see the Check Engine light illuminate and stay on. If you do not see the Check Engine light, the bulb is defective or has been removed.
That is the check engine light. Looks like a picture of an engine.
If the check engine light is blinking on your 2005 Dodge Stratus, you most likely have a sensor that is damaged or requires replacement. You can check this by accessing the diagnostic computer at the dealership.
a 2000 dodge ram 1500 the check engine light is on and the code says torque converter and clutch and overdrive solenoid. what do you think that the problem is?
If the check engine light is flashing when the engine is running , that indicates that an ignition misfire has been detected