0
Yes, you can install a turbo on a motor with an 11:1 compression ratio, but it requires careful tuning and management to avoid engine knock or detonation. Typically, higher compression ratios are more suited for naturally aspirated engines, while turbocharged engines often have lower compression to handle increased boost pressures. To safely run a turbo on a high-compression engine, you may need to use lower boost levels, high-octane fuel, and potentially additional modifications like upgraded intercooling and engine management systems.
What else can I help you with?
How much boost to run on an rsx-s?
6 pounds of boost is the safest without engine damage. the compression ratio of a type-s motor is 11:1.0 this is really high, and to add more pressure on the motor will simply cause engine damage. most turbo cars the come stock with turbo have a ratio of 9:1.0 or 9:5.0 having a boost controller is very important when adding a turbo or supercharger. at 6lbs of boost, you will have 50-60 hp more. and for the type-s its pretty good. anymore you will need motor work.
What transmission would be in my 1979 11-78 GM 3500 Van-Dura motor-home that has a small block 400 in it?
That would be a HEAVY DUTY 400 Turbo
When was Turbo Outrun created?
Turbo Outrun was created on 1989-02-11.
When did Power Rangers Turbo end?
Power Rangers Turbo ended on 1997-11-24.
What are the release dates for Turbo Teen - 1984 The Amazon Adventure 1-11?
Turbo Teen - 1984 The Amazon Adventure 1-11 was released on: USA: 1984
How do you install ansys 11 on vista?
You must install ansys 11 sp1. It run perfect.
How much oil for a C3500 turbo diesel?
11 qts
High Compression ratio not used in spark ignition engine?
S.I Engine lower compression Ratio is 6 to 11
Is an mpeg the same as an MP3 file?
No, there different types of audio compression. I belive the compression ratio for mp3 is 11:1.
How do you replace Hyundai accent 2000 wiper linkage Please include required tools?
# Remove the wiper arms and blade assemblies. # Remove the cowl panel. # Remove the pivot shaft mounting nuts and push the pivot shaft toward the inside. # Remove the wiper motor mounting bolts. # Disconnect the linkage from the motor and remove. To Install: # Lubricate the wiper linkage. # Connect the wiper linkage to the motor. # Install the wiper motor to the firewall. # Pull the pivot shaft into position and install the pivot shaft mounting nuts. Tighten to 7-11 ft. lbs. (10-15 Nm). # Install the cowl panel. # Install the wiper arm and blade assemblies. # Check wipers for proper operation.
What is the top speed of the Mitsubishi rvr turbo diesel?
11 rm
When was Motor-CAD created?
Motor-CAD was created in 1999-11.
