2009 torrent, drive 22mm 12 point socket into stock lock lig and remove with breaker bar or long rachet. works for me, punch out with 9/16 18 bolt. I pressed my out. took all of 5 mins to do all 4 wheels
Removing a ignition lock cylinder from a 2002 ford windstar with no key
Without the key you are going to have to drill it out.
you don't.
To lock a door using a key, insert the key into the lock, turn it clockwise until it stops, and remove the key. This action will secure the door and prevent it from being opened without the key.
Yes, a good mechanic should have the tools to remove a wheel lock without damage to the wheel.
1996 rodeo- how to remove key from lock ignition?
you need the key to get it out unless you a car thief.
You would have to drill out the center of the lock or have a locksmith pick the lock.
If no key, you'll have to destroy the cardboard glove box and to access the lock bracket....remove the upper bracket that the lock grabs onto located at the mid-top of the opening...may need to do a little prying....or remove the lock from the backside.
To lock a Schlage keypad lock without a key, simply press the "Schlage" button on the keypad followed by the "Lock" button. This will engage the lock without the need for a physical key.
Yes, there are methods to remove a key stuck in a deadbolt lock without causing damage. One common approach is to use lubricant, such as WD-40, to help loosen the key. Another method is to gently jiggle the key while trying to pull it out. If these methods do not work, it is recommended to contact a professional locksmith for assistance to avoid damaging the lock or key.
with a barrel lock key