You can not. I just did that about 5 min ago and nothing changed.
With a scan tool or by unhooking the battery.
With a scan tool or a battery disconnect.
To reset the service light on a Grand Scenic 54 the engine's computer should be reset. An easy way to reset the computer requires unplugging the battery for 5 seconds. The computer will then reset.
Try unplugging your battery for 5 minutes. Or you can go to Auto Zone they'll do it for free. If you unplug your battery you will need to drive around to reset your computer.
nothing works and I replaced the battery. to the fob
Reseting a service light can be down using a professional diagnostic tool and plugging directly to the ECM. A quicker way requires unplugging the battery for 5 seconds. But unplugging the battery will also reset the stereo.
Take it to auto zone or orielly part store something similar to that and have them use the machine that plugs in under the dash and select reset code. One other thing u might try is unplugging the battery for a half hour to force reset the computer. goodluck.
To reset a 2004 Chrysler Pacifica, you typically need to disconnect the battery. Start by turning off the ignition and then disconnect the negative battery cable. Leave it disconnected for about 15 minutes to allow the system to reset. Reconnect the cable, and this should clear any error codes and reset the vehicle's systems.
do you have to reset computer after changing battery in 2003 745li
There is nothing to reset. The computer will function normally when you connect the battery again.
You do not have to reset the computer.
Disconnect the battery, wait 5 seconds, and reconnect it. It should start then. When you replace any electronic or electrical, the computer will not realize it until the car's computer is "reset". To do this, you must unhook, and the rehook the battery.