I'll try to help.
It seems that the engine is running at a rich adaptive limit, indicated by the fault codes you got. I would check a few things:
1: Voltage at the TPS. (throttle position sensor)
2: Voltage at the MAF/MAP. (Mass Air Flow/Manifold Absolute Pressure) sensors.
3: Basic tune up condition of the engine.
4: EGR system.
5: Ignition timing.
6: Check for engine vac leaks.
Hope this helps
The country code 181 is not assigned to any specific country for telephone calls. Country codes are typically assigned in the range of 1 to 3 digits, with each country having a unique code. The code 181 does not correspond to any recognized country code in the international dialing system. It is possible that the code 181 is used for other purposes such as internal or special dialing codes within a specific country or organization.
The country code and area code of Spijkenisse, Netherlands is 31, (0)181.
The country code and area code of Jallandhar- Jalandhar, India is 91, (0)181.
The keyword "a112 181" is significant in the project as it serves as a unique identifier or code that helps organize and categorize specific information or data within the project.
The factors of 181 are 1 and 181, as 181 is a prime number. Prime numbers are numbers that are only divisible by 1 and themselves. In this case, since 181 is only divisible by 1 and 181, those are the only factors of 181.
181 can only go in 0 1 and 181 that is all for the number 181
The mode is 181.
1 x 181, 181 x 1
10.3% of 181 = 0.103 x 181= 18.643
181
181 is a prime number. The factor pair is: 1, 181
181% of 19 = 181% * 19 = 1.81 * 19 = 34.39