answersLogoWhite

0

This problem is not likely to be directly related to having replaced the front brake pads, although it may be possible that your brake pedal height was altered somehow, especially if you had a leaking brake line or bled the brakes. Check your brake switch, it should be located near your brake pedal inside the cab and under the dash. You should be able to locate it by pressing and releasing the pedal while looking for a button or switch that is contacted (by the pedal) by doing so. Said switch must be adjusted so that the pedal will activate the switch (usually by holding a button switch in) when the pedal is released. Some trial and error adjustments will tell you what works properly and what doesn't. Having a friend watch the brake lights and telling you when they're on or off while you make adjustments will speed up the process.

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

Why do your ford explorer power door lock button lights stay on when the vehicle is turned off?

If the lights in your lock buttons remain on after the truck is powered off, you may have a problem with your fuse. It the light remaining on could be because you have an electrical problem in your Ford Explorer, as well.


How do you reset the ABS light 2006 Nissan xterra and the VLC warning lights?

The abs light is on because there is a problem with the abs system. Until the problem is fixed the light will remain on. Once the problem is fixed the light will reset itself after a short drive.


Why do your reverse lights remain on with the tail lights?

Either the switch that turns the backup lights on is out of adjustment, or has failed in the on position.


Remain stopped as long as these lights on a school bus are flashing?

Red lights flashing on a school bus mean remain stopped until they are turned off.


Why do your brake lights remain on when you have the lights on but work just fine when they are off?

This usually means a bad or wrong bulb in the tail lights


How do you reset abs lights?

The abs light is on because there is a problem with the system. The light will remain on until it is repaired. Once the repair is done the light will reset itself after a few miles of driving. Take it to your mechanic, he can diagnose the problem and tell you what has to be done.


Why does ford ranger brake warning lights remain on?

if you have your parking brake off and it is still on, then you have a problem with your brakes somewhere, you need to check the fluid, lines, pads and all the other stuff


What are remain of organisms that are actually changed to rocks are called?

Fossils.


After replacing all four grounds and headlight switch why would parking lights go off when headlights are on?

That's how 1964 1/2 thru 1967 Mustangs lights are designed to operate.. when the headlamps are turned on the amber parking lights are turned off. That was changed sometime in 1967-68 so that the amber parking lights remain on when the headlamps are on.. It is possible to install a later model (1968) type headlight switch and wiring if you really want the parking lights to remain on when the headlamps are on however. Electrical Wiring drawings are available (to purchase) for every year mustang from almost any mustang restoration shop/website.


Why does brake light remain on on Honda accord?

Year? Brake lights on the car? The dash? I would suspect you have a problem with the brake system. Check the master cylinder to see if it is full. If so, take it to a professional for inspection.


Why do xsara Picasso side and brake lights stay on without even turning lights on?

If the side and brake lights on a Citroën Xsara Picasso remain illuminated without the lights being turned on, it could be due to a faulty switch, such as a stuck brake light switch or a malfunctioning lighting control module. Additionally, a wiring issue or a short circuit could lead to unintended activation of the lights. It's advisable to inspect these components to diagnose and resolve the problem.


Why do interior lamp lights on the rearview mirror remain on for Cadillac XLR?

The interior lamp lights on the rearview mirror of a Cadillac XLR may remain on due to a malfunctioning switch, a problem with the vehicle's electrical system, or an issue with the interior lighting timer. Additionally, if the vehicle's door sensors are not detecting that the doors are closed, the lights may not turn off as intended. Checking the manual for specific features and troubleshooting steps can help identify the cause. If problems persist, consulting a professional mechanic is recommended.