The check engine light (service engine soon) comes on and stays on when a problem is detected by the self diagnosis system of your vehicle. Generally, the problem is in the emissions or something that is affecting the effectiveness of the emissions, but other causes can trigger the light to come on, too. To determine the cause, the vehicle will need to be taken to AutoZone or a shop that has an OBD2 scanner, or for 1995 and earlier models, an OBD1 scanner, While a scanner will not give you the magic answer, it will give you a code that narrows down the problem area.
Check your fluid levels.
Fix the problem causing them to be on.
There is an engine misfire, probably spark plugs issue.
To reset the check engine light unplug the battery for 30 minutes. If the issues still persists the light will still light up when reattached.
Get the computer scanned to see what the problem is.
this is for safety so engine does not get ruined,check oil level!!
There are pages and pages of things that can cause a check engine light. You need to have it checked with a scantool. Then the code can be diagnosed and repaired.
Disconnect the negative battery terminal for at least 30 seconds.
If the check engine light is illuminated, start with scanning for codes.
Any failure that can increase tailpipe emissions.
To reset the check engine light on a 2013 Chevy Malibu, you can disconnect the negative battery cable for about 10-15 minutes to clear the engine control unit's memory. Alternatively, you can use an OBD-II scanner to read and clear any stored trouble codes, which will also reset the light. Ensure that any underlying issues causing the check engine light are resolved before resetting it. After reconnecting the battery or using the scanner, the light should turn off.
If your 2001 Chevy Malibu's check engine light is on and the temperature gauge is not functioning, it could indicate a problem with the engine coolant temperature sensor or the gauge itself. Additionally, the check engine light may signal a variety of issues, from minor to serious. It's advisable to use an OBD-II scanner to retrieve any diagnostic trouble codes, which can help pinpoint the problem. Once you have that information, consider consulting a mechanic for a thorough diagnosis and repair.