It could.
Trouble code P0307 means:Cylinder 7 misfire detected
Trouble code P0307 means:Cylinder 7 misfire detected
Cylinder #7 Misfire
An open injector circuit code typically indicates a problem in the fuel injector circuit, where the engine control unit (ECU) detects that the electrical connection to the injector is interrupted or not functioning properly. This could be due to a broken wire, a faulty connector, or a malfunctioning injector itself. As a result, the affected injector may not receive the necessary signal to open and allow fuel to flow, potentially causing engine performance issues. Diagnosing the specific cause often requires checking the wiring and components associated with the injector circuit.
Spark plug, wire, coil, low compression, fuel injector, intake leak, etc.
P0205 means that the PCM detected a fault in the injector 5 or the wiring to the injector. Could be a bad injector number 5. Maybe the wires to the injectors or the PCM is faulty.
The P0201 fault code on a 2005 Holden Commodore indicates a problem with the fuel injector circuit for cylinder 1. This could be due to a faulty injector, wiring issues, or a problem with the engine control module (ECM). It's important to inspect the injector and its connections to ensure they are functioning correctly. If the issue persists after checking these components, further diagnostics may be needed to identify the root cause.
Misfire on cylinder #3, not sure of the cause (no spark, blown gasket, injector problem).
Yes, an injector can cause issues related to a mid 128 PID 94 FMI fault code, which typically indicates a problem with the fuel system or injector performance. This fault may suggest that the injector is either malfunctioning, clogged, or not delivering the correct amount of fuel. It's important to conduct a thorough diagnostic to confirm the injector's condition and check for any other related issues in the fuel system. Addressing the injector problem can help resolve the fault code and restore optimal engine performance.
P301 is cylinder 1 misfire. The easiest fix is replacing the spark plugs, but the problem could also be cause by a burned valve or a malfunctioning injector.
Trouble code P0200 means: Injector Circuit Check all injector circuits
That error code is for a single cylinder misfire. Bad spark plugs or wires can cause this as well as a bad fuel injector.