0
A clutch is a device that connects or disconnects the powersource to the gears. A gear on the other hand is the actual device through which power is transfered.
In a car you typically have five forward gears, one reverse gear, and one clutch.
In the simplest design, the engine drives a shaft - which drives a gear - which drives the wheel. The clutch allows the engine to spin either engaged or disengaged from the shaft. You can think of it like mixer... there are different speeds you can choose, but if you don't have the bit engaged it won't spin... The clutch essentially is like taking the bit out of a beater.
Hope that makes sense
What else can I help you with?
What is relation between gear box and clutch?
gear and clutch relation _ when clutch is disconnect this time gear shifting thats relation
What is the difference between single plate clutch and multi plate clutch?
"What is the difference between single plate clutch and multi plate clutch?"
Is there a difference between holding the clutch down or putting the gear into neutral while standing in the traffic lite -In a technical manner?
Leaving your vehicle in first gear with the clutch depressed allows you to move out of the way quicker if you notice the vehicle behind you is not going to be able to stop before it hits you.
I have a speedfight 2 and its preety old.. if i change the clutch will i see difference on the speed?
Doubt it. Depending on clutch condition, it might make the clutch action and changing gear smoother.
What is the Difference between pulley and a gear?
what is
Clutch location on 2002 Ford F-150?
clutch is same place as any other vehicle between the gear box and the flywheel
Are you coasting if in gear with clutch in?
Of course you are coasting. The clutch has disengaged the transmission (no matter what gear) from the engine.
Is there any difference between ATA sparring gear and WTF sparring gear?
Sparring gear is universal.
What is the difference between a driver gear and a driven gear?
The driver gear has the input torque, and the driven gear has the output torque.
Why is the manual clutch not going into gear?
clutch slave cylinder.
What is the fundtion of clutch?
The clutch is the pedal you press to change gear.
Is the clutch or the linkage the problem when a car can be put into gear but doesn't move.?
Most likely the clutch is shot. When the clutch plate can't engage with the transmission there will be slippage between the engine and the drive wheels.
