No. However, newer plug wires can be extremely difficult to remove without damaging them.
Yes
Disconnect the battery, remove the spark plugs wires and boots and remove the spark plugs. Put in the spark plugs, replace the spark plug wires and boots, and connect the battery.
No you do not need to replace any plugs at all when replacing wires.
Disconnect the battery, remove the spark plug wires and boots, and remove the old spark plugs. Toss out the old spark plugs, put in the new spark plugs, replace the spark plug wires and boots, and connect the battery.
Pull the spark plug wires off the spark plugs. Remove the spark plugs with a spark plug socket. Install the new spark plugs and put the spark plug wires back on. I recomend replacing the spark plug wires as well. If replacing them, just remember that the new wires are hooked up the same ways that the old ones came off.
Remove the spark plug wires from the spark plugs, use an extension for your Allen wrench, and use a spark plug socket to remove the spark plug.
remove the spark plug wires one at a time and unscrew the plugs
Disconnect the battery, remove the spark plug wires and covers, and remove the old spark plugs. Next, put in the new spark plugs, attach the covers and spark plug wires and reconnect the battery.
Disconnect the battery, remove the spark plug wires and boots, and remove the old spark plugs. Dispose to the old plugs, put in the new spark plugs, replace the spark plug wires and boots, and connect the battery.
You have to follow the wires and find the plugs first. Change those with a spark plug wrench that fit's them Replace the plug wires one at a time.
Replacing Spark Plug High Voltage WiresNO, not necessarily. Spark plug wires only need to be replaced maybe once or twice in the life of a vehicle, IF THEY HAVE NOT BEEN PHYSICALLY DAMAGED OR ABUSED.Therefore, it is normally not necessary to replace the plug wires when replacing the plugs.
Remove the spark plug wires from each spark plug. Turn the spark plug out with a 5/8 deep well socket. Reverse the process to install the new spark plugs.
There are no spark plug wires, this is a coil on plug system. The spark plugs are under the coils that bolt to the middle of the valve covers.There are no spark plug wires, this is a coil on plug system. The spark plugs are under the coils that bolt to the middle of the valve covers.