answersLogoWhite

0

You do not have to but it will be very good if you place a die-electric grease on points where ignition wires contact spark plugs and distributor/coil pack.

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

How do you change spark plug wires for a 94 caprice?

The spark plug wires on your 1994 Chevrolet Caprice are quite easy to change. The spark plug wires simply lift off on each end. Put the new spark plug wires on and push until you feel a click.


How do you change the spark plugs in a 92 GMC Sierra 2500?

Pull the spark plug wires off the spark plugs. Remove the spark plugs with a spark plug socket. Install the new spark plugs and put the spark plug wires back on. I recomend replacing the spark plug wires as well. If replacing them, just remember that the new wires are hooked up the same ways that the old ones came off.


Step by step how do you change the spark plug wires in a 1972 thunder bird?

Go to auto parts store and buy new spark plug wires. Arrange new wires, longest to shortet. Starting with the longest ones, remove old plug wires one at a time and replace them with matching length new ones. (length can be approximate) Do this until all wires are replaced. note: it's a good idea to get some dielectric grease from your auto parts store and coat both of your new spark plug wires ends before installing. Makes them last longer and also easier tune ups.


Change spark plug wire 1999 mercedes-benz C230 Kompressor?

Changing the spark plug wires in your 1999 Mercedes-Benz is quite simple. The spark plug wires simply lift off. The new spark plug wires can be pushed onto the spark plug. It is best to change one wire at a time.


How to change spark plug wires in a 1988 Chevy Cavalier z24?

The 1988 Chevy Cavalier spark plug wires are quite easy to remove. The spark plug wires simply pull off on each end. Put the new spark light wires on by pushing downward on each end.


How do you replace the spark plugs in a VW GTi VR6 2004?

Disconnect the wires to the battery, remove the spark plug cables and boot covers, and remove the old spark plugs. Next, put in the new spark plugs, attach the boot covers and spark plug cables and reconnect the wires to the battery posts.


Does changing spark plug wires do anything?

Yes, particularly if they are old and cracked. New wires will deliver a better spark to the plugs. FriPilot


How do you change wire?

Spark Plug Wires? Remove them 1 at a time from the spark plug to the distributor or the ION pack, remove and replace the spark plug, add the new spark plug wire from the newly added spark plug to the distributor or ION pack.


Why does car not start after it rains?

It could be in need of a new set of ignition wires (spark plug wires).


You changed your iridium spark plugs after 115k miles now your engine shake and sputters?

perhaps you connected your spark plug wires incorrectly check your firing order if you crossed a couple of spark wires the engine may still run but very roughly also you may have spark plug wires that are not fully connected to the plug are you reusing the old plug wires may be time for a new set check connectors for corrosion recomend using high quality spark plug wires


How do you replace an Acura Integra distributor?

Unplug all the spark plug wires. then loosen the screws holding the distributor on, remove it, put the new one on and screw it in, then replace the spark plug wires


How do you change spark plugs on a 1994 Toyota pick up?

Disconnect the battery, remove the spark plug wires and covers, and remove the old spark plugs. Next, put in the new spark plugs, attach the covers and spark plug wires and reconnect the battery.