0
What else can I help you with?
Why does the fuel GAUGE needle vibrate?
Most likely the cluster, but it could be the sending unit.
What does an oil sending unit do?
it sends the computer the oil pressure so it can be displayed in your cluster
Is it possible to upgrade the instrument cluster in a 1995 beretta with a 3100 from one with no tach to one with a tach?
Yes, but you need to be sure you're swapping a cluster from 1991-1995 V6 engine only. The tach will not be accurate if using a cluster from a 4 cylinder, and will not work at all using a cluster from 1996. This is VERY easy to do! You can swap them out and everything on the cluster will work just fine except for the oil pressure gauge. It will say, "0" this is because the old oil sending unit was designed to make your dummy light on the old cluster come on in the event of oil loss. When you replace your cluster with the one with the gauges you will need a new oil sending unit. Tell the parts guy that you need an oil sending unit for a 96 Beretta WITH gauge NOT light. It is easy to replace. It is located on the front of the motor about half way down!
What do oil pressure switch do?
monitor and read oil pressure. sending that info to the gage cluster.
Sending unit is not working no fuel 1992 Volvo 940 gle?
This is a common problem with the instrument cluster connections on the back of the cluster itself. The contacts need to be resoldered. Remove the cluster, and use a solder iron to heat and reflow the solder connections.
How do you get the fuel gauge on your 1978 Chevy truck to read correctly?
In most cases it's the sending unit in the gas tank at fault. It would require dropping the gas tank to replace the sending unit.
Why would the lcd speedometer and tachometer work but the fuel gauge not on an 1984 corvette?
Either - Instrument cluster has internal failure in it, thus requiring removal of the cluster to be sent out for repairs. - Sending unit has failed, thus needing replacement, it is attached at the fuel pump (you remove the fuel filler neck to remove pump and sending unit)
2004 Chrysler pacifica at half tank fuel gauge will intermittently drop bell will sound and then return to half tank since tank looks easy to drop what is procedure for replacement of sending unit?
it may not be the sending unit. some pacs had this issue cause of bad cluster.so i'd make sure your cluster is %100 good before trying the sending unit.you can buy a cluster from e bay for less than $50 and try it out.since the cluster is not the part that stores the mileage you don't have to worry about adjusting the mileage...hope this helps
1993 Ford Probe gas gauge is not working there is no power to sending unit in tank is there a fuse behind the instrument cluster?
I am having the samew problem with my probe and a mchanic said it is the fuel pump sending unit. there is no fuse for it.
How do you fix a broken gas gauge on a 1986 Mazda b2000?
pull the gauge cluster and check to make sure all the wires are hooked up. if not it will probably be the sending unit or even problems with the fuel pump. pull the gauge cluster and check to make sure all the wires are hooked up. if not it will probably be the sending unit or even problems with the fuel pump.
How do you fix your fuel gauge on your 82 cutlass?
The cause of the faulty fuel gauge is probably the fuel gauge sending unit located inside the fuel tank. Replacing the sending unit would require dropping the fuel tank.
Shes confused and is sending mixed signals?
She is sending this mixed signals because she does not know yet if she is ready for a relationship with you. Maybe she is because you are the one sending mixed signals and she is because she does not know if you like her.
