I'm guessing your talking car audio, and you mean the speakers have a higher wattage rating than your stereo output. its a good idea not to underpower speakers too much. the sound will be distorted, and you could possible damage the speakers. there are two ratings of wattage for speakers and amps. RMS and Peak watts. always build your system using the RMS wattage. its is the real wattage. the peak is only usefull in the labratory its built in. RMS is is constant ability to put out, or receive that power all the time. The impedence (ohm value) of the speakers is important, it should be the same as the amp.
If you are wondering where you can find decent reviews and descriptions for home stereo speakers because the speakers at your home are outdated, then you can try www.speakersreviews.org
To hook up stereo speakers in a truck, attach the stereo wiring to the stereo and run it to the speakers. Clip the stereo speakers into the wires and place them in the panel spaces in the truck.
Well mostly it depends on the peak wattage of your stereo, if you have a higher wattage stereo I would go with speakers that could handle your stereos watts or they will distort.
Dont understand your question because stereo speakers are normal speakers
No matter what musical genre you like the best, a stereo system can help to enhance your listening experience. From speakers to amplifiers, stereo systems come in various forms, and it is important to understand the components involved when searching for a stereo system to purchase. While the size of the speakers on a stereo system is important, matching those speakers to the correct amplifier is just as important. Furthermore, bigger is not always better. As sound engineering technology has continued to improve, manufacturers of audio equipment are finding ways to deliver deep, rich sound in a smaller, more compact set of speakers. In the past, one would need to purchase very large speakers that would be housed inside of a cabinet in order to achieve these results. However, today, this is simply not the case. When looking for speakers for a stereo system, it is important to know the wattage they can handle. This will help you to decide which amplifier you will need to use in conjunction with them. Speakers can range in size from a few inches to a few feet in size, so understanding your space requirements is important as well. If you are purchasing speakers for a stereo system for your car, you will need to find the smallest speakers with the largest wattage rating to get the most for your money. If you are purchasing speakers for a stereo system for your home, you may have a little bit more room to pick and choose. In terms of purchasing an amplifier, again, it pays to know how it will correspond to your speakers. If the amplifier has a wattage rating higher than what the speakers can handle, you may risk doing damage to the speakers, the amplifier, or both. You may want to consider asking an expert before purchasing a stereo system to ensure that all of the components will work well together. Finally, consider your power source. If the amplifier will be installed in a car, you may need to purchase a separate battery to power it. However, if the amplifier and speakers are being placed in your home, ensure that your power outlet can handle them before plugging anything in.
Yes, the speakers (150W) can handle more power than the stereo (140W) can produce. If it were the other way around (stereo more powerful than speakers), that's when you burn out your speakers.
The speakers in a stereo contain powerful magnets.
The speakers are powered by the stereo, which in turn the stereo has a fuse. If the stereo works (turns on), but not the speakers, then it may be a wiring issue.
2.0 and 2.1 or even 5.1 regarding speakers means that there are 5 speakers to one output device such as the stereo. 2 speakers coming out of 1 stereo or 5 speakers coming out of one stereo. If you were to talk about 9.2 this would mean that there are 9 speakers but attached to 2 output devices such as a television as well as a stereo. Hope this has cleared up your problem.
When purchasing car speakers you'll need to know what size you need, the amount of watts they speakers can handle and their resistance level. You'll also need to understand the resistance level and wattage output of either the stereo or amplifier that is sending the power the signal to the speakers.
The possessive form is: "The stereo's speakers are too small for this room."
in the red or white at the back of the speakers