answersLogoWhite

0

Not always, there is a standard shower valve that most handles will work for. it depends on what your set up is. As far as the shower head is concerned you should be able to put anything on.

As I'm standing at Home Depot looking at all the different shower valves on the display I wonder which one is the "standard" that all handles and trim fit on. The fact is unless you are replacing with it the same valve or in some cases the same brand all the trim plates and handles have to be changed.

*It TOTALLY depends on the brand and make of your faucet. You would have to determine what brand the faucet is(ex. Moen, Delta), The next move is to determine which model it is(ex. Moen Heritage, Delta Leland). Then you get their own catalogue # and determine what cover plate, handle and screws will fit onto your existing faucet, order them, and replace them. ALL FAUCETS AND THEIR PARTS ARE MADE DIFFERENTLY!!!*Cheers, QuiteSomething

Ans 4 - YES, you DO need to replace this valve unless your new fixture is identical

User Avatar

Wiki User

10y ago

What else can I help you with?

Related Questions

How do you change the exterior door handle on 2003 corolla?

You remove it and replace it...


How can I change the light fixtures in my bathroom?

First of all, you need to decide if this a job you can handle by yourself or if you may need the help of a professional. Light fixtures, like the glass domes to be replaced are quite easy. If you want a total new look and their already is an existing fixture, buy a kit and follow directions very carefully, but do not hesitate to get professional help if needed. A good link would be: http://www.diynetwork.com/how-to/replace-a-bathroom-light-fixture/index.html


How do you changed the parameters of a named range in Excel?

There are different ways you could do it. You could go into the name manager and pick the name of the existing range. It will show the cell addresses for the range. You can change them to be the range you want.Select the new range. Then add it as a new named range, using the existing name you want to change. It will ask if you want to replace it. You can do that and then the range will have the new parameters.There are different ways you could do it. You could go into the name manager and pick the name of the existing range. It will show the cell addresses for the range. You can change them to be the range you want.Select the new range. Then add it as a new named range, using the existing name you want to change. It will ask if you want to replace it. You can do that and then the range will have the new parameters.There are different ways you could do it. You could go into the name manager and pick the name of the existing range. It will show the cell addresses for the range. You can change them to be the range you want.Select the new range. Then add it as a new named range, using the existing name you want to change. It will ask if you want to replace it. You can do that and then the range will have the new parameters.There are different ways you could do it. You could go into the name manager and pick the name of the existing range. It will show the cell addresses for the range. You can change them to be the range you want.Select the new range. Then add it as a new named range, using the existing name you want to change. It will ask if you want to replace it. You can do that and then the range will have the new parameters.There are different ways you could do it. You could go into the name manager and pick the name of the existing range. It will show the cell addresses for the range. You can change them to be the range you want.Select the new range. Then add it as a new named range, using the existing name you want to change. It will ask if you want to replace it. You can do that and then the range will have the new parameters.There are different ways you could do it. You could go into the name manager and pick the name of the existing range. It will show the cell addresses for the range. You can change them to be the range you want.Select the new range. Then add it as a new named range, using the existing name you want to change. It will ask if you want to replace it. You can do that and then the range will have the new parameters.There are different ways you could do it. You could go into the name manager and pick the name of the existing range. It will show the cell addresses for the range. You can change them to be the range you want.Select the new range. Then add it as a new named range, using the existing name you want to change. It will ask if you want to replace it. You can do that and then the range will have the new parameters.There are different ways you could do it. You could go into the name manager and pick the name of the existing range. It will show the cell addresses for the range. You can change them to be the range you want.Select the new range. Then add it as a new named range, using the existing name you want to change. It will ask if you want to replace it. You can do that and then the range will have the new parameters.There are different ways you could do it. You could go into the name manager and pick the name of the existing range. It will show the cell addresses for the range. You can change them to be the range you want.Select the new range. Then add it as a new named range, using the existing name you want to change. It will ask if you want to replace it. You can do that and then the range will have the new parameters.There are different ways you could do it. You could go into the name manager and pick the name of the existing range. It will show the cell addresses for the range. You can change them to be the range you want.Select the new range. Then add it as a new named range, using the existing name you want to change. It will ask if you want to replace it. You can do that and then the range will have the new parameters.There are different ways you could do it. You could go into the name manager and pick the name of the existing range. It will show the cell addresses for the range. You can change them to be the range you want.Select the new range. Then add it as a new named range, using the existing name you want to change. It will ask if you want to replace it. You can do that and then the range will have the new parameters.


Does the proposed insured intend to replace or change any existing policy?

If you are the proposed insured you need to answer that question. If you are the agent you need to ask it!


What is a cosmetic change in a building?

Cosmetic changes to buildings usually refer to the exterior/interior upgrades from their existing state. i.e. - a corporate building would have renovations done for commercial tenant improvements.


How do you Take off the Plastic cover to replace the turn signal bulb on the 2000 300M?

what bulb? if you need to change exterior front or rear or indicator? let me know.


If you change your bathroom light fixture to antique bronze do you have to change all other fixtures to match?

Only if you have a wife that is an interior designer. Electrically the circuit doesn't care the colour of the fixtures that are connected to it.


Rotating a triangle by 50 will change the measures of the exterior angles by?

Rotating a triangle by 50 degrees will not change the measures of its exterior angles. Exterior angles are defined based on the triangle's geometry and the positions of its vertices, which remain unchanged by rotation. Thus, regardless of the triangle's orientation, the exterior angles will retain their original measures.


How do I change the white brake light bulbs on a 2000 VW Golf?

From the inside of the hatch area uncover the light fixtures. The lamp carrier is held in place by plastic clips. Depress the clips to remove the lamp carrier. Replace the lamps as required and replace the carrier in the fixture. Check your work.


How do you change the armrest covers on Chevrolet astro van?

you replace the door panel or buy armrest covers that go over the existing ones. This will cost you less and address the concern.


How can I change vinyl siding to brick on my house?

To change vinyl siding to brick on your house, you will need to remove the existing vinyl siding, prepare the exterior walls for brick installation, and then install the brick veneer. This process may require professional help to ensure proper installation and adherence to building codes.


How do you change the blower motor resister in a 2000 Buick Century?

Should be some wires going into a bolted-in plug on the exterior of the ductwork on the firewall of the engine compartment near the blower. just unplug, unbolt and replace.