Am afraid the car Philips 400 does not support an auxiliary input. However, you may try putting signals into pins 9 and 10 and using 3 as the ground.
philips car 400 calculator
i forgotten Code
Frank's power output is 400 watts (W). This is calculated by dividing the work done (2400 J) by the time taken (6 seconds), which results in a power output of 400 W.
There is a Philips screw that you can turn in or out, this adjusts the headlights. Or two nuts holding it in at the top.
To fit a new stereo in a Rover 400, start by disconnecting the car battery for safety. Remove the existing stereo by prying off the trim panel and using a stereo removal tool to release the unit from its housing. Connect the wiring harness of the new stereo to the existing harness or use an adapter if necessary, then secure the new unit in place and reattach the trim panel. Finally, reconnect the battery and test the stereo to ensure it functions properly.
CD player and Cassette player are out of fashion now. The new cars have MP3 players and iPod. Suggest get a basic MP3 player and a transmitter and plug it in the cigarette lighter socket to play all your music.
thin wall 18 mm socket
Using a local Bristol business directory should uncover many stereo repair shops. Also, with almost 400 listings in the Bristol Yellow pages, it should be easy to find a stereo repair shop.
My 71 CB 500 is 22mm I believe. Try that
The efficiency is 80%. To find the efficiency, 400/500 = 80%.
.8 or 80%i.e. The output is 80% of the input.
The ones I worked with had an input of 12 vdc and output 400 vdc.