0
What else can I help you with?
Will a ford 302-351w bolt to a 300 six cyl 4 speed bell housing?
The Ford 302 engine will not bolt to the 300 six-cylinder bell housing. A new bell housing or a Bell housing modification kit will need to be used.
Will a 2.3 ford bell housing fit a 2.8 ford?
no, it won't
Where is the bell housing on a 1992 Ford Ranger?
The bell housing is the front of the transmission ( the larger diameter portion ) where the transmission is bolted to the engine
Will the bell housing detach from the transmission in a 1997 Ford Taurus?
The automatic transmission housing / case is a single casting, so the bell housing cannot be detached separately.
Does Ford A4LD transmission have a removable bell-housing?
Yes you can change the bell-housing from 3.0 v6 or 4.0v6 and 2.5 2.3 4 cyls all have removable bell-housing hope this helps
Where is the concentric slave cylinder on a 98 Ford Fiesta?
it is inside the bell housing
Is the bell housing the same on a Ford 460 and a Ford 351?
the bell housing bolt pattern is the same but the flywheel on 460 is thicker and makes they pressure plate hit bellhousing from 351m/400 there for it will not work you have to have a bellhousing from a 429 or 460
Where is the transmission pump on 1994 Ford Explorer?
The front pump is incorperated in bell housing
Can a 64 ford c4 trans be adapted to a ford 302 engine?
The C4 will bolt up to the 302 with the correct bell housing.
Where is the bleeder valve for the clutch on a 99 ford ranger?
I'm not a mechanic / technician but I believe it is on the drivers side of the transmission , extended out from the bell housing , where the hydraulic line enters the bell housing for the slave cylinder
Will a 4 speed transmission out of 76 ford with a 360 Bolt to the to bell housing of 300 straight 6?
No it won't the 360 has an almost perfectly round bell housing ..and the 300 6 is the small block bell housing which has the top two bolt holes higher so it will not line up
302 ford motor fit a C-6 trans?
yes, a very good match. this combo started in the mid sixties with the Ford Mustangs. I have had several with a c-4/c-6 tranny. yep, take a c6 trans, and use a c4 bell housing.
