0
What else can I help you with?
What is a speed control deactivation switch?
It's near the brake pedal or brake light switch.... It deactivates cruise control
What is the small silver switch for located in front of your left shin above the brake peddle in a 1989 MGM?
There are two. The brake light switch and the cruise control cut off switch. You are probably talking about the cruise control cut off switch. When you depress the brake pedal, the brake lights come on and the cruise control stops. Hope this helps
Where is the cruise control brake pedal switch on a 2002 Mercury villager?
On the brake pedal.
How do you check the brake light switch on a 1994 Camry with cruise control?
Common issue...if the brake light swith is not working; the cruise control will not engage and your brake lights will not go on. replacing switch is easy and inexpensive...its located in the upper part of the brake pedal.
Why did your cruise control quit working after you replaced the brake booster?
If your cruise control quit working after replacing the brake booster, it could be due to a vacuum leak or a malfunction in the brake switch. The brake booster operates using vacuum pressure, and if there’s an issue with the connection or a damaged hose, it may affect the cruise control system. Additionally, the brake switch, which disengages cruise control when the brakes are applied, might not be properly aligned or connected, preventing the system from functioning correctly. It's advisable to check both the vacuum connections and the brake switch to diagnose the issue.
Why two brake light switches in a 1988 240 Volvo?
One for brake lights, one for cruise control. If you hit the brakes when using cruise control, that second switch is what tells the control modules that the brake is being depressed.
Where is the brake light switch on a 2000 Cadillac Catera?
at the top behind brake pedal, don't remove the lower switch it for the cruise control
How to fix the cruise control in Buick LeSabre limited 2000?
To fix the cruise control in a 2000 Buick LeSabre Limited, start by checking the fuses related to the cruise control system in the fuse box. Inspect the cruise control switch on the steering wheel for any signs of damage or malfunction. Additionally, examine the brake pedal switch, as a faulty brake switch can interrupt the cruise control function. If these components are functioning correctly, further diagnostics may be needed to check the cruise control module or wiring.
Could a bad brake light switch cause cruise control to not work?
yes
Where is the cruise control switch located for the Lincoln town car 93?
The cruise control switch on a 1993 Lincoln Town car is attached to the master brake cylinder under the hood. Ford had a recall on this car because the cruise control switch could lead to a fire.
How do you install a brake light switch with cruise in a 1990 Jeep Cherokee?
Start by removing the connections for the cruise control and brake lights, then remove the bolt that holds the switch to the brake pedal. Once the brake pedal is loose the switch is held on the brake pushrod by a bushing with nylon retaining washers. Carefully remove one washer and slide the bushing out, the switch can now be removed from the pushrod. Installation is the reverse; line up the hole on the switch with the hole on the pushrod, make sure the tabs for the cruise control and brake lights are facing properly. Reinstall the bushing and replace the other nylon washer, replace the bolt and tighten. Lastly connect the brake lights and cruise control.
Is there a fuse for Cruise Control for 2000 Chevy Express Van?
No. The Cruise Control is controlled by the engine ECM. If your cruise control isn't working, you probably either have a bad switch to actuate the cruise control, or a brake pedal switch which is in constant contact, and thus telling the computer it's engaged when it isn't.
