No. The chipped ignition key did not start until the 1998 model year and was only on the 6 cylinder Contour and Mystique.
(I've got a '97 6 cylinder Contour that seems to have a chip in the key.)
Ford Contour was created in 1995.
The curb weight of a 1995 Ford Contour is 2769 pounds.
Locate pcv valve on 1995 ford contour
yes it will fit
The transmission plug on a 1995 Ford Contour is located on the side of the pan. It allows for fluid to be quickly drained during maintenance.
Yes
They are available online. Do a google search for "Contour wiring diagram".
If you have the 3.8L engine, ignition timing is controlled by the computer and cannot be altered without making changes to the computer. If you have the 3.1L engine, which has a distributor, you can set the timing as you would on any engine with a distributor.
Yes , a 1995 Ford Contour should have a heater core . It is used to warm the air ( if necessary ) that comes in to the passenger compartment of the vehicle
In the fuel tank
Not necessarily on either. A used computer will not require a reprogramming. Also, if the fan itself is damaged, then unit would be replaced not the computer.
I was looking at fordparts.com and for the 1995 Ford Contour 2.0 liter four cylinder it shows ( Motorcraft RT-1150 , a 190 * F thermostat )