The antifreeze should be diluted How much is up to you. Also be sure to configure in the location where you live (hotter, colder) as this also makes a difference I'm pretty sure that antifreeze needs some water to work properly (activates chemicals in antifreeze) If you went 70% antifreeze & 30% water you should probably be fine no matter where you live.
==========================================================
Ford vehicles come from the factory with a 50 / 50 mix of distilled water and the correct type of antifreeze for the vehicle . Ford states not to exceed 60% antifreeze in the mix
A "professional flushing of antifreeze" is when a mechanic or other paid professional connects a hose assembly to your car radiator while at the same time opening the release valve (usually located at the bottom of the radiator) and forces water thru your car's water cooling system. The effect is to cleanse the system of old and rusted water and old antifreeze. This procedure is usually done just prior to adding new antifreeze to a car's cooling system, most often before the winter driving season. The end result being a more effective cooling system for the car. Hope this helps.
When running the air conditioner, there might be a small leak of fluid on the 2000 Alero after it is parked. This is normal as it is only the overflow valve being released. Always check the antifreeze level before operating the vehicle in the summer to prevent low antifreeze warnings.
Flushing is blood vessels near the skin filling with blood. This is usually in response to some stimuli such as being embarrassed. It is a response to hormones being released into the bloodstream.
Being an aircooled engine, the cooling medium is air .It does not need antifreeze
Use antifreeze labeled as being "Dexcool approved". It'll typically be orange.
Your toilet makes noise when flushing because of the water flowing through the pipes and the movement of the flushing mechanism. The noise is normal and is a result of the water pressure and air being pushed through the system.
In the NewsInferno.com archives, I found this statement: "Because melamine possesses high nitrogen contents, it is used to falsify protein levels in foods, being added when food is diluted with other, less expensive food products or water. The addition of melamine creates the impression of high protein levels in the diluted products."
To obtain a solution that is twenty percent antifreeze, you would add 4 parts water to 1 part antifreeze. This means that for every 1 part of antifreeze, you would add 4 parts of water. This would result in a total of 5 parts of solution, with 1 part being antifreeze and 4 parts being water, achieving a solution that is twenty percent antifreeze.
Hard water can cause antifreeze color to change due to mineral deposits and impurities from the water being mixed with the antifreeze. This can result in the antifreeze appearing darker or discolored. It is recommended to use distilled water when mixing antifreeze to avoid color changes and ensure optimal performance.
The toilet gurgles after flushing because air is being sucked into the drain pipe, causing a vacuum effect. This can happen if there is a blockage in the plumbing system or if the vent pipe is clogged.
Blown Heater Core - The heater fan blows past the heater core and if it has a hole in it your antifreeze ios being blown onto your windshield.
The root word for "antifreeze" is "freeze," which refers to the state of being solidified due to cold temperatures. "Anti" serves as a prefix indicating opposition or prevention.