1. stop the vehicle and make sure vehicle is in "park"
2. engage parking brake for 1 secound
3. release parking brake for 1 secound
4. engage parking brake permanently
GOT THESE INSTRUCTIONS FRESH OUT OF THE BOX
If you're looking for the code to override the parking brake settings, where the movie will play while in drive, this receiver has no code to override this. The only thing you can do is ground the cable to a grounded source(not to the parking brake mechanism) an install a toggle switch in line. Then flip the switch off for a second and back on. The movie will then show up on the screen. You'll have to mount a toggle switch somewhere in the vehicle, but at least that will make it play when the vehicle's out of park. This is so far the only thing I know that will work on this particular unit. If anyone figures out a way to modify the unit to work without a toggle switch, please let us know.
I found this on amazon. I don't know if it works so am going to give it a try.
Here's the link:
http://www.Amazon.com/Dual-Bypass-Lockout-Orignal-Automatic/dp/B0047X0W72/ref=sr_1_cc_2?ie=UTF8&qid=1296939798&sr=1-2-catcorr
So far (Nov. 2009) Dual has not released the permanent code for the 9101. The only thing you can do right now it the e-brake or a toggle switch. Happy motoring.
You know that is illegal right? Yes but that was not the question. Is there a code or can a toggle be used? No there is no code it how it's wired up. Ground out the parking trigger wire on the head unit.
phase linear uv8020 bypass code for parking brake without remote?
microbypass
parking brake
If only the red brake light is coming on, the parking brake is on or the brake fluid is low. If the yellow abs light is also on, the abs computer has detected a malfunction and set a code.
Look up by the parking brake under the dash board. They used to put a sticker there with the master keyless entry code on it.
2E Code 2E: Parking Brake Switch Error SW7 is closed when travel is detected. Troubleshoot switch a Troubleshoot switch and wiring.
Hello. Bypassing a parking brake on a newer Clarion radio (vx400, nx501, vz401, vx401, and vz709) requires an interface. You can not just ground the parking brake wire or put in a code... people that tell you this are wrong. The least expensive, smallest, and best quality i have found are on http://microbypass.com. I am an installer and i use these all the time. The company also sells them on Ebay too.
stop, stop...1234567890...hidden menu stop, stop...1234567890...hidden menu
take out the cup holder in the center console next to the parking brake. it should be right under there.
Hello. Bypassing a parking brake on a Pioneer radio requires an interface. You can not just ground the parking brake wire or put in a code... people that tell you this are wrong. The least expensive, smallest, and best quality i have found are on microbypass.com. I am an installer and i use these all the time. The company also sells them on Ebay too.