Look to the left ( near the door side) under the glovebox. You will see a curved black plastic thing with a hole in the top. When you put your finger in it seems empty but if you feel around you will find a rubbery feeling cover. Push down here as it is not so much a switch as a button.
To check if the fuel cut-out switch on your Fiat Brava is working, first locate the switch, typically found in the trunk or near the fuel tank. Press the reset button, then try starting the engine; if it starts, the switch is functioning correctly. If the engine doesn't start, check for any signs of fuel delivery issues or a faulty switch, and consider consulting a mechanic for further diagnosis. Additionally, you can measure continuity with a multimeter to ensure the switch is operational.
The inertia switch on a 1996 Fiat Brava serves as a safety mechanism designed to cut off the fuel supply in the event of a collision or sudden impact. This prevents fuel leakage, reducing the risk of fire. The switch is typically located in the vehicle's cabin or trunk and can be reset manually after activation.
location of fuel cut off switch
Fiat Stilo (52 Plate) Cut off switch is located behind the panel on the passenger side well.
i have found this in the center of the dash, but above the floor
fuel cut off switch is under dash near center console towards bulkhead just press it in and off you go
To reset the fuel cut-off switch on a Fiat Bravo, locate the switch, which is usually found in the boot or near the fuel tank. Press the switch firmly to reset it; you may hear a click indicating it has been activated. After resetting, check the vehicle's electrical system and ensure there are no underlying issues. Finally, attempt to start the engine to see if the reset was successful.
On Fiats, the fuel cut off switch is normally under the passenger seat on behind the cover by the passenger (left hand side) kick panel by your feet.
The switch is down beside the drivers door sill..its a soft rubber button, you cant miss it! :)
To reset the fuel cut-off switch on a Mk3 Fiat Punto, locate the switch, which is typically found in the trunk or under the dashboard. Press the reset button on the switch, ensuring it clicks back into place. If the vehicle still doesn't start, check for any underlying issues that may have triggered the cut-off, such as a fault in the fuel system or electrical connections. Always consult the owner's manual for specific details related to your model.
On a 2001 Fiat Punto, the fuel cut-off switch, also known as the inertia switch, is typically located in the passenger compartment, often near the driver's side, under the dashboard or behind the glove compartment. It may be a small, rectangular button that can be reset after a collision or when the fuel system is disrupted. Always refer to the vehicle's manual for the exact location and instructions on how to reset it if necessary.
To reset the fuel cut-off switch on a Fiat Bravo diesel, locate the switch, which is usually found in the trunk or under the dashboard. Press the reset button firmly until you hear a click. After resetting, ensure that all doors and hatches are closed, then attempt to start the engine. If the vehicle still does not start, further diagnostics may be necessary.