The Firing order for VT V6 commodore is 1-6-5-4-3-2, this is the basic firing order cycle for most VT v6 commodore.
Trying to get my car to start as it over heated the other day so I changed the Harmonic sensor and the cam angle sensor. And still not starting but it has spark. Anything you can suggest
Vvt v6 has a firing order of even numbers on left and odd numbers on right. It is 6-4-2 on the left and 5-3-1 on the right.
Holden VT Commodore was created in 1997.
the vt commodore has a automatic tensioner. you will need a 15mm socket and breaker bar or spanner. it is a left hand thread so if you apply pressure counter clockwise you will move the tensioner and be able to slip the belt on. that is if your talking about the v6 engine.
turn signal located on VT commodore
how much to get brake pads and rotors replaced on a holden vt commodore
A liffter is one of those cases that is of vital distinction and you will demand expert help about
1.5mm
Passenger side kick panel
Replacing a head gasket on a VT Commodore instructions can be found in a manual. Manuals can be bought at most auto parts retailers or in book stores.
The flasher unit relay location on a 1997 VT Commodore is under the steering column. The door has to be opened to reach the relay.
Commodore front and rear doors fit 6" speakers
To fix the door handle of a VT Commodore, remove the hardware from the door and loosen the knob. Remove the turn post and tighten all mechanical parts.