0
What else can I help you with?
How much and what type of fork oil to use on a 2001 yz125?
For a 2001 Yamaha YZ125, it's recommended to use 10-weight fork oil. The capacity for each fork leg is approximately 400cc, but it's essential to check the owner's manual for specific measurements and settings, as they can vary slightly. Ensure to replace the oil regularly to maintain optimal suspension performance.
What is the fork oil capacity on a 2002 Yamaha FZ1?
14.7 us oz
What is the fork oil capacity of an ex 500 ninja?
For 2002 ex500 models others will be similar it takes 352ml of oilper fork. 15wt oil is what is manufacures speck for fork oil
What is the fork oil capacity of a 2002 ninja 600?
588ml dry or ca 500ml oil change
What is fork oil capacity for Honda xr 70 2002?
2.5 oz +/- 0.03
Fork oil capacity for 1999 Yamaha r1?
r1 fork oil capacity
97 suzuki vz800 fork oil capacity?
what is the capacity or how much fork oil does a vz800 take ?
What is fork oil capacity 2002 Honda vt 600?
The fork oil capacity for a 2002 Honda VT 600 is approximately 10.6 ounces (or about 315 ml) per fork leg. It's important to check the specific service manual for your motorcycle for exact specifications, as variations can occur based on modifications or maintenance history. Always use the recommended fork oil type for optimal performance.
What is the front fork oil capacity for a 2002 GSXR 1000?
The front fork oil capacity for a 2002 Suzuki GSX-R1000 is approximately 570 ml (19.3 oz) per fork. It's important to use the recommended type and viscosity of oil, typically 10W, for optimal performance. Always consult the service manual for specific maintenance details and procedures.
What is the fork oil capacity of a Honda CB500?
320cc is the fork oil capacity on early K model CB500s.
What is the fork oil capacity on a Honda ST1300?
St1300 fork oil capacity is 638cc per leg 10w
How do you change fork seals in 2002 yz125?
To change the fork seals on a 2002 YZ125, first, remove the front wheel, fender, and brake caliper. Next, loosen the top and bottom fork clamp bolts and slide the forks out of the triple clamps. Using a seal driver or a suitable tool, carefully remove the old seals and install the new ones, ensuring they sit evenly in the fork tubes. Finally, reassemble the forks, adding fresh oil as specified in the service manual, and reinstall them on the bike.
