238ml per fork
r1 fork oil capacity
Lance's Haynes manual says: Capacity: 555cc, Type: Yamaha fork oil "01" or equivalent
To change the fork oil on a 2003 Yamaha YZ125, start by removing the front wheel, brake caliper, and fender to access the forks. Use a fork seal driver to compress the forks and remove the top caps, then drain the old oil by inverting the forks and letting the oil flow out. After draining, refill with the appropriate type and amount of fork oil, reassemble the forks, and ensure everything is properly torqued before reinstalling the front wheel and other components. Always consult the owner's manual for specific oil capacity and type recommendations.
what is the front fork oil capacity for showa upside down forks on a 1997 suzuki 750cc gsxr? what is the front fork oil capacity for showa upside down forks on a 1997 suzuki 750cc gsxr?
fork oil amount yamaha thunderace
fork oil capacity for a 2009 yz450f is 6.73 us oz recommended oil is Yamaha suspension oil "S1"
20.5 oz
To service the front forks on a 1982 Yamaha Virago, start by removing the front wheel and brake calipers, then loosen the fork clamps at the triple tree. Next, drain the old fork oil by removing the fork caps and sliding the forks out of the triple tree. Clean the fork tubes and inspect seals for wear; replace them if necessary. Finally, refill with the appropriate type and amount of fork oil, reassemble the forks, and ensure all components are securely tightened.
The fork oil capacity for a 2005 Yamaha YZ250F is approximately 450cc per leg when using the recommended oil level. It's important to use the correct type of fork oil and to check the manual for specific recommendations. Always ensure the forks are fully compressed when measuring the oil level for accuracy.
482 cm3
440 cc
seven inches from the top with the fork collapsed and the spring out