Remove the old line keeping it intact as much as possible retaining its original shape. Measure the total length of the old line including all bends. Have your local auto parts store help you with purchasing the correct length and fittings to match your old one. Bend up the new line to match the old line as close as possible. A little longer is better than a little shorter. Install the new line and bleed the system.
its three screws. and threw plugs
how do i find out if i have ABS on my front wheel bearing , on my 2000 dodge Dakota quad cab 2 wheel drive
Alternator going bad..replace it. Just had the same thing on my 2000 neon
The release handle is right above the parking brake pedal underneath the dashboard on left side.
The towing capacity of a 2000 Dodge Dakota V6 is about 7500 pounds. The Dodge Dakota was discontinued in 2011.
either a bad sensor somewhere, or a connection is disconnected
Yes
Unbolt the old ones and put the new one in.
Often these are accessed thru the trunk; have you tried that?
howdo you change the front axel of a dodge Dakota 2000 4x4
Dodge does not have 4.3L engine. A 3.7L was not used in a 2000 Dakota. So no.Dodge does not have 4.3L engine. A 3.7L was not used in a 2000 Dakota. So no.
Possible, but not likely. You could check with a parts dealer and see if the parts number is the same. And if they're used shoes, don't bother, used brake shoes should never be swapped between vehicles.