If your Warrior 350 has spark and compression but won't start, the issue may lie in the fuel delivery system. Check if fuel is reaching the carburetor and ensure that the fuel lines are not clogged. Additionally, inspect the carburetor for any blockages or malfunctions, and verify that the air filter is clean. Lastly, ensure that the kill switch and safety features are functioning properly.
Check for fuel, spark ,and compression
Chck fuel, spark, and compression.
Does it turn over? Does it have fuel, spark, compression?
Does it turn over? Does it have fuel, spark and compression?
Perhaps the spark plug system is not sending electricity to the spark plugs.
Does it have spark, fuel, compression?
if it is cranking but wont start check for spark, fuel, air and compression.
compression? bad/worn/broken timing chain..
its need 3 things to start fuel spark compression and they have to be all at the right time
An engine requires gas and spark to fire but it also requires compression and timing. If it has gas and spark, I would check the compression...should be over 100 to run good. If it has good compression then I would check to see if the spark occurs when the compression does. If it doesn't then you probably have a sheared key on the flywheel.
The engine needs fuel, compression and spark to run. You are missing one of those.
Does it turn over? No Fuel? No Spark? No compression? Weak or bad battery?