answersLogoWhite

0

Tap the "Info" button on your touch-screen control panel and select the maintenance item that you would like to reset Tap on the appropriate item and tap reset distance. Repeat with each maintenance item and reset each item as desired.

User Avatar

Wiki User

10y ago

What else can I help you with?

Related Questions

How do you reset oil maintenance light after oil change 2007 Corvette?

well


How do you reset the maintenance required light in a 2007 Toyota?

To reset the maintenance required light in a 2007 Toyota, first, turn the ignition switch to the "OFF" position. Then, press and hold the trip meter reset button while turning the ignition to the "ON" position (do not start the engine). Continue holding the button until the maintenance light flashes and then turns off. Release the button, and the light should be reset.


How do you reset the maintenance required light on a 2007 Toyota Tacoma V6?

disconnect the battery


How do you Reset the Maintenance Light on 2007 Toyota 4Runner?

To reset the maintenance light on a 2007 Toyota 4Runner, start by turning the ignition to the "ON" position without starting the engine. Press the gas pedal three times within five seconds. After that, turn the ignition off and then start the engine to ensure the maintenance light is reset. If done correctly, the light should no longer be illuminated.


How do you reset the TPMS light on a 2007 Infiniti G35x?

To reset the TPMS light on a 2007 Infiniti G35x, first ensure that all tires are inflated to the recommended pressure. Then, turn the ignition to the "ON" position without starting the engine. Press and hold the TPMS reset button, typically located beneath the steering column, until the TPMS light blinks three times and then turns off. Finally, start the vehicle to complete the reset process.


How do you reset the maintenance required light on a 2007 accord?

to reset press and hold the odo reset and turn car on (do not start) and continue to hold for 10 seconds. light will go off


How can you reset a12 on mdx 2007 Acura?

To reset the A12 maintenance light on a 2007 Acura MDX, turn the ignition to the "ON" position without starting the engine. Press the "Menu" button on the dashboard, navigate to "Vehicle Settings," and then scroll to "Maintenance." Select "Reset" for the A12 maintenance item, and confirm the reset. Finally, turn off the ignition and then restart the vehicle to ensure the light has been cleared.


How to reset regular maintenance required 2007 volvoxc90?

To reset the regular maintenance required light on a 2007 Volvo XC90, turn the ignition to the "ON" position without starting the engine. Press and hold the trip odometer reset button (located on the instrument cluster) until the display shows "Resetting" or "Service Reset." Release the button, and the maintenance light should turn off. Finally, turn off the ignition and start the vehicle to ensure the reset was successful.


How do you reset the 'maintenance required' light on an 2007 Toyota Rav 4?

To reset the 'maintenance required' light on a 2007 Toyota RAV4, start by turning the ignition to the "ON" position without starting the engine. Press the gas pedal three times within five seconds. After doing this, turn the ignition off and then start the engine again; the light should be reset. If the light remains on, repeat the process to ensure it has been properly reset.


What is the tire maintenance light mean on 2007 Infiniti G35?

It's not a 'tire maintenance light' it's a TPMS (Tire Pressure Monitoring System) light, which lets you know that one of your tires is below the recommended level of air pressure.


How do you reset mainentance light on 2007 Avalon?

You can reset the 2007 Avalon maintenance light by setting the oil life to 100 percent. When the oil life display is on your monitor, hold in the scroll button until it goes to 100 percent.


How do youTurn off maintenance light 2007 Honda CR-V?

Check the owner's manual under 'maintenance minder'. It will tell you exactly how to do it.I did it last night on a 2007 Element:- press reset button until the maintenance is indicated- press and hold down reset button for about 10 seconds, the display will begin flashing- release and then press the reset button down again for about 5 seconds- the 'maintenance minder' will reset