0
Its fairly simple. First, you'll have to remove the old horn. There will be a cable you need to remove, with a locking snap, like every other electrical connection in the car. Remove that, then proceed to remove the retainer bolt from the horn's mounting arm. After you get the old horn out, save the screw that held the arm in, and re-use the arm if it fits on the new horn, but it probably won't.
If you bought a generic horn, you'll need to cut off the wire connector, and solder on whatever connectors the horn uses. This is a pain, as the wire isn't long enough to bring down and solder.
Once you've soldered the connectors on, mount and connect the new horn in the same place the old one was located. Check the fuse, and test.
What else can I help you with?
How do you fix the horn on a 1988 delta 88?
buy a new horn and install it
How can I install an air horn on a motor home?
In order to install an air horn on a motor home you will need to but the air horn kit and follow the direction supplied within. Although air horns are generally limited to semi's.
How do you install a horn in a Chevrolet s10 truck?
first off, which end of the horn are you needing to install, under the hood is one thing, in the steering column is a whole diff story.
How Dow I unplug the horn to install the battery on a 2004 Malibu Maxx?
You don't have to unplug the horn to replace the battery.
How do you install asounding horn on a clio 2007?
To install a sounding horn on a 2007 Renault Clio, first, ensure the vehicle is off and the battery is disconnected. Locate the existing horn, typically found near the front grille or behind the bumper. Remove the old horn by unscrewing it from its mount and disconnecting the wiring harness. Install the new horn by reversing the process, securing it with screws, reconnecting the wiring, and finally reconnecting the battery to test its functionality.
How do you replace the horn on 1996 Chevy Corvette?
Begin by removing the wiring harness from your 1996 Chevy Corvette horn. Remove the horn retaining bolts. Reverse the process to install the new horn.
How to install a horn 1999 blazer?
To install a horn on a 1999 Blazer, first disconnect the negative battery cable to ensure safety. Remove the horn cover or grille to access the old horn, then unbolt it from its mounting location. Disconnect the wiring harness from the old horn and connect the new horn, ensuring it's securely mounted. Finally, reassemble any covers, reconnect the battery, and test the horn to ensure it works properly.
How do you install a new Pontiac Solstice horn?
To install a new horn on a Pontiac Solstice, first disconnect the negative battery terminal for safety. Remove the front grille or access panel to reach the horn, typically located behind it. Disconnect the old horn's wiring harness and remove it from its mounting bracket, then install the new horn by reversing the process—attach it to the bracket and connect the wiring harness. Finally, reattach the grille or panel and reconnect the battery.
How do you replace horn on a Dodge Ram 1500 1995?
Remove the wiring harness from the back of your 1995 Dodge Ram horn. Remove the horn retaining bolts. Reverse the process to install the new horn.
How do you install a horn for a Toyota Celica?
You don't...you trade it in for a better car.
How do you install horn in Renault traffic 2011?
To install the horn in a 2011 Renault Trafic, first, disconnect the vehicle's battery to ensure safety. Remove the front grille or access panel to reach the horn, which is typically located near the front of the vehicle. Disconnect the wiring harness from the old horn and remove it from its mounting bracket. Install the new horn by reversing the process: attach it to the bracket, reconnect the wiring harness, and reassemble the grille or panel before reconnecting the battery.
How do you disconnect the horn in the steering column and install an external horn switch on a 1980 Chevy silverado?
it is easier to repair the OEM horn assembly than to "rig" up a button
