My 1992 Mercury Topaz right rear line has broken and I see the leak coming out a metal casing. How do I get to line by inside the car because I do not see any lines like in other cars which are located out side the car plase help.
4
what is the engine?
how to set timing on 92 ford mercury topaz 2.3 engine
The 1992 Mercury Topaz was not equipped with airbags as standard safety features. Airbags became more common in vehicles in the mid to late 1990s, and the Topaz was produced before this trend was fully established. Therefore, if you have a 1992 model, it likely does not have airbags.
It is positioned in the valve cover.
According to one of Fords websites : For a 1992 Mercury Topaz , 2.3 litre four cylinder engine : ( the spark plugs are gapped at .054 inch )
location fuel pump relay 92' merc topaz
In the gas tank.
They (2) should be up by the firewall on the passenger side
15 Gallon except on all wheel drive.
To change the back brakes on a 1992 Mercury Topaz, first, lift the rear of the vehicle and remove the wheels. Next, take off the brake drum by removing the retaining screws or using a hammer to gently tap it off if it's stuck. Replace the brake shoes by disconnecting the springs and removing the old shoes, then install the new shoes and reassemble everything. Finally, reattach the drum and wheels, making sure to pump the brake pedal before driving to ensure the shoes are properly seated.
Inside the engine compartment on the passenger side wheel well.