The transmission media is wrapped (glued, epoxied) with some high temperature adhesive which cover the drums or drums, depending on the size of the transmission. A smaller car may have just one clutch drum, while a larger car may have 2 or three clutch drums wrapped by clutch bands. When the vehicle is new the bands have a certain thickness and run the length around the drum, thus an area of transmission media per drum X the number of bands. As drivers, begin to abusively drive their cars, in places, they shouldn't be or like 4 wheel drive trucks, they start wearing the band away and the bandwidth decreases because the media begins to decrease in thickness and fall off in some cases, scars the drum and ruins stopping ability
There is a relation between transmission media and bandwidth. The transmission media cannot exceed the amount of bandwidth available. The transmission of media is limited to the bandwidth.
The bandwidth of the transmission media The modulation encoding used
The transmission bandwidth refers to the range of frequencies that are being transmitted from one point to another. The channel bandwidth on the other hand refers to the frequencies of a given channel.
Transmission bandwidth depends on modulating signal frequency and carrier frequency
it is a transmission media..
No, lower bandwidth does not mean more data transmission. Bandwidth refers to the maximum rate at which data can be transferred over a network connection; a lower bandwidth indicates a reduced capacity for data transmission. Therefore, with lower bandwidth, less data can be transmitted in a given time period compared to higher bandwidth.
TCP-IP is a protocol, not a transmission medium. Bandwidth doesn't affect it.
The frequencies which are used to transmit data.
Broadband transmission makes the best use of bandwidth. With broadband, there is little to interfere with the individual computer download or uplink.
By using Fiber Optics, we can achieve 100Gbps.
When selecting a transmission media type, consider factors such as bandwidth requirements, distance limitations, and environmental conditions. Assess the cost-effectiveness of the media, including installation and maintenance expenses. Additionally, evaluate the level of interference the media may encounter and the security needs of the transmitted data. Lastly, compatibility with existing infrastructure and future scalability should also be taken into account.
Sw1-sw2 divides the collision domain and provides full media bandwidth to the hosts in the network.