answersLogoWhite

0

Someone puts sugar in your fuel, fuel runs through the engine, bingo bango bongo your engine will fail.

User Avatar

Wiki User

13y ago

What else can I help you with?

Related Questions

Why does the oil light flicker at idle on your 2001 Chrysler Sebring with a 2.7 engine?

Low oil, low oil pressure, failed oil pressure sensor.Low oil, low oil pressure, failed oil pressure sensor.


Can a faulty mechanical fuel pump contaminate your engine oil?

A failed fuel pump can cause gasoline to get into the oil.A failed fuel pump can cause gasoline to get into the oil.


Why is the oil light on in a Chrysler 300?

Engine not running, low oil, low oil pressure, failed sending unit.


I have no oil presser unless you rev engine 4.7L grand Cherokee?

Plugged filter, or a failed engine.


Why does the engine oil light come on when car is at operating temperature?

Low oil level, low oil pressure, failed oil press sending unit.Low oil level, low oil pressure, failed oil press sending unit.


3.4 liter engine in a 2003 Malibu is getting oil in the antifreeze but not antifreeze in the oil?

Intake gaskets have failed.


Is the 2.7 Chrysler engine a lemon?

YES unfortunatly ,Chrysler failed to produce a reliable engine due to oil sludge problem, water pump problem and timming chain problem. Buy a 3.2 or a 3.5 instead


Why is there a coolant leak into the oil in a Chrysler Sebring?

If you have the 2.7L, the water pump may have failed. It is inisde the engine, driven by the timing chain. On any engine that can also be caused by a failed headgasket.


What type Oil in 1976 sportster is it the same primary oil engine oil?

engine and primary share the same oil on the 1976 sportster,due to engine oil sumps into primary.


Engine problem due to no oil?

call a oil company to help you out


What causes the oil light to come on at idle if engine is full of oil?

Normally caused by failed oil pressure sensor. It is located on the back of the block.


What does it mean when you drain the oil from a 1990-92 kx80 and there are small bearings in it?

engine bearings failed . do not run engine until bearings have been replaced. (note) count the bearings that came out in the oil and compare that number to the number on your new bearings. any bearings left in the engine can become failed with other parts and harm the engine. Some times, magnets will placed into oil filters.