wich side want turen engine for make timing seting
On the "b" series in a Dodge truck it is either on the driver side of the timing cover, the side of the valve cover, or the top rear of the valve cover.
yesyes
5.9L 24 valve Cummins5.9L 24 valve Cummins
To change the number 5 injector on an N14 Cummins engine, first, ensure the engine is cool and disconnect the battery. Remove the valve cover to access the injectors, then carefully disconnect the injector wiring harness and fuel lines. Use a socket to remove the injector hold-down bolts, pull out the old injector, and replace it with a new one, ensuring proper alignment and torque specifications. Finally, reassemble the components in reverse order, reconnect the battery, and check for leaks before starting the engine.
The fuel pump is on the drivers side near the back of the engine next to the fuel filter, the injector pump is near the front of the engine with six metal tubes coming out of the top of it.
The 2000 5.9 liter Cummins engine E GR valve can be found on the air cleaner housing. The valve is usually on the back of the air cleaner housing.
What is the valve lash on a cummins engine 16 V
valve timing diagram of two stroke engine
If it smokes without a "chip" it might have a failed injector.
The Cummins diesel does not have a timing belt.
variable valve timing is where the engine changes valve timing based on the driving situation much like ignition timing is changed to meet the needs of the engine in specific situations. in most cars valve timing is static and determined by the timing gear on the camshaft
It should be on the top of the valve cover connecting the engine and the injector.