Either front door or trunk should disable the alarm.
To disable the car alarm on a 2000 Chrysler LHS, you can start by unlocking the driver's door with the key. If the alarm is still activated, you can insert the key into the ignition and turn it to the "On" position without starting the engine. Additionally, disconnecting the car's battery for a few minutes can reset the alarm system. If these steps don't work, consult the owner's manual or a professional for further assistance.
You can not disable, it is part of the body computer. Unlocking the drivers door with the key should turn it off if it is activated.
It was as factory option.
The factory alarm can not be disabled. If you can not disarm this alarm, the switch on the door key cylinder has failed or is not connected.
A Chrysler LHS does not have a reset button.
The fuel pump in a 1995 Chrysler LHS is in the fuel tank. There is an access panel under the carpet in the trunk.
5x114.3
Unlock with the remote or with the key in the door cylinder.
you have top use the factory remote or unlock the driver door with the key.
It can not be disabled, it is reset with the remote or by unlocking the door with the key.It can not be disabled, it is reset with the remote or by unlocking the door with the key.
Lower driver side of the engine.