price on lavor and parts on chaning oil pan gasket on a 1999 s10 pickup
No.
Changing the oil pump on a 96 S10 is simple but will take some time. All you do is jack up the car, drain the oil, remove the oil pan gasket, take out the oil pan, unbolt the old oil pump and put in a new one.
you must unscrew the holder it is in. Its tight but when you wiggle it out the top comes up and you just have to slide the oil pan out.
Drain oil from oil pan, remove oil filter through access door unde raditator.
To drain the oil on a 1991 Chevy S10 Blazer, located the oil pan drain plug. Use a wrench to remove the plug and the oil will flow into the receptacle you have provided.
It is at the lowest point of the engine oil pan and it takes a 15mm wrench to remove it.
Loosen the motor mount bolts the long bolts through the center of the mount and take them out and jack up the engine and take off oil pan.
In the oil pan
The oil drain plug would be at the lowest point on the engine oil pan. It should take a 15mm wrench to remove it.
Inside of oil pan.
The engine oil drain plug is located at the lowest point of the engine oil pan. It should take a 15mm wrench to remove it CCW.