JAK UP TRUK/USE JAK STANDS, REMOVE ONE WHEEL AND THEN TAKE DRUM OFF WITH A RUBBER MALLET, THEN MEASURE THE BACK SIDE OF THE DRUM, THE PART THAT WAS OVER THE BRAKE SHOES
You have to measure them.
Either 9 inch or 10 inch brake shoes
The 2003 PT cruiser uses brake shoes with the part number: 5018209AA
You could have either 9 inch or 10 inch , depending on the brake drum size
i bought 9
If your truck is equipped with 9 inch brake drums, you need 9 inch brake shoes. Many Dakotas were equipped with 10 inch drums and shoes though, so be certain which size yours is. The size measured is the inside friction surface diameter of the drum.
Just give your vehicle info to the man at the parts counter at your local auto parts store and he will give you the correct ones. brake shoes are vehicle and application specific and are not categorized by size.
I'm not sure if your using metric or not. It is highly advised to measure. It will be 9", 8 7/8" or a third size minutely smaller than the 9".
what size torx bolt holds the rear parking brake housing on the 2005 chrysler pacifica
9 mm by 1.25
5-1/4 front, 5x7 rear
3/16