Remove the two pins going through the pads. Pull out the old pads, push in the piston and install new pads, replace pins with the clips.
How to Install Front Brake Pads Check Related links below.
155.75.13
1342
brakes adjust themselves automatically
To change the rear brake pads on a 1994 Ford Laser KJ2, first lift the rear of the vehicle and secure it on jack stands. Remove the rear wheel, then locate the brake caliper and unbolt it to access the brake pads. Slide out the old pads and replace them with new ones, ensuring they are properly seated. Reinstall the caliper, wheel, and lower the vehicle, then pump the brake pedal to ensure proper pad seating before driving.
A brake calliper for a 1986 Ford Ranger would be likely to cost between $20 and $40, depending on where you source it.
To change the front brake pads on a 1991 Ford Laser, start by lifting the vehicle and removing the front wheels. Next, remove the caliper bolts and slide the caliper off the rotor, taking care not to damage the brake line. Replace the old pads with new ones, ensuring they are properly seated, and compress the caliper piston if necessary. Finally, reassemble the caliper, reattach the wheel, and lower the vehicle before testing the brakes.
DOT 3 brake fluid
how change brake fluid . i have ford focus lx 2000.ans how change air filter.
oops i did not mean to click on this and answer it.
DOT 3
Unlike the front calipers, pistons in the rear usually have to be rotated to compress them.