Some have a 3 wire set up. Some a single wire. I just did my 1st one tonight and it was very simple. Worked 1st try and thats not usualy my luck. Very important to disconnect the (-) negative wire from the battery before starting. It could damage the new one and void any warranty.....Good luck
what wires do i need to hook up to the alternator
wires are crossed or you have a short in the wiring from the alternator to the battery.
Noting, just install it and hook it up.
go to the store and get a new plug for your year of car cut the wires hook them up to the same color tape or shrink wrap exposed wire plug into alternator good to go
what exactly happens to your alternator when you hook up your battery backwards?
on factory wire harnes, there are 5 speaker wires. 4 are (+). on speakers, but only one (-). when i hook up aftermarket head unit do i hook up all negative speaker wires together
Need to know what wires and which harness you speak of.
To hook up an alternator in a Chevelle, first ensure the battery is disconnected for safety. Connect the positive terminal of the alternator to the battery's positive terminal, and the negative terminal to the car's ground. Then, connect the field wire or the voltage regulator wire to the appropriate terminal on the alternator. Finally, secure the alternator properly and reconnect the battery before testing the system.
You can get the mirror wiring diagram needed to hook up 8 wires for 1999 Tahoe at the motor vehicle text books.
I believe the '92 Metro has three wires (two in one connector, one in the other) to the alternator.
as long as you know what wire does what
It depends entirely on what the wires are connected to - this question is unanswerable.