The coolant goes into the expansion tank. If you open the bonnet and look to the back/left as you're looking at it, you'll see a plastic bottle with a screw top lid.
DO NOT open the bottle if the engine has been running as it will be under pressure and could eject boiling water under pressure and you risk being scalded. Make sure the engine is cold before you open this bottle.
The coolant goes into this bottle (expansion tank) but needs to be filled to about half way. There is a marker on the bottle showing an upper limit and a lower limit, you need to fill it between these marks.
Do not overfill as you need to leave enough air in the tank/bottle to allow the coolant to expand when it gets hot. Liquid expands when it gets hot, hence why the tank is called the expansion tank.
The type of coolant you need depends upon the age of your vehicle. Consult with a qualified person or parts store to get the right type. Coolant is usually a 50/50 mix of coolant and water. You can buy your own coolant concentrate and mix with water or you can buy it already mixed which is more expensive. You need to use distilled water to mix with the coolant and not water from the tap, since the tap water may contain trace amounts of elements that might be corrosive to the engine.
more than 1 ml
If you are looking at the car from the front... The coolant expansion tank (where you add coolant/water) is a large white header tank on the left at the rear of the engine bay. It is to the immediate right of the offside suspension strut.
A similar car to the Peugeot 206 is the Peugeot 205 which the Peugeot 206 is modeled after with minor modifications and upgrades from the Peugeot 205 to the Peugeot 206.
The thermostat on a Peuget 206 is located on top of the engine, under the upper radiator hose. It controls the flow of coolant out of the engine.
How to disable Peugeot 206 immobilizer?
get the universal antifreeze it can be used with the blue or red antifreeze
A Peugeot 206 is a type of automobile. It is a car of the hatchback variety. A used Peugeot 206 is one of these automobiles that has had a previous owner.
no
In a Peugeot 206, you should add water to the windshield washer reservoir, which is typically located near the front of the engine bay, marked with a blue or clear cap featuring a windshield symbol. For coolant, you would fill the expansion tank, usually found near the radiator, and it's important to use the appropriate coolant mixture. Always ensure the engine is cool before opening any caps to avoid burns.
The best coolant for a Peugeot 206 Turbo Diesel HDi is typically a high-quality, ethylene glycol-based antifreeze that meets the PSA Peugeot Citroën specifications, often referred to as a long-life coolant. Look for a coolant that is either green or orange in color and has a mix of 50% coolant and 50% distilled water for optimal performance. Always check the owner’s manual for the exact specifications and guidelines to ensure compatibility with your vehicle's cooling system. Regular maintenance and timely replacement of the coolant are crucial for engine protection and efficiency.
A new Peugeot 206 will cost about $32,500 at base model. If you want a faster engine, air conditioning or automatic transmission, be prepared to add $4,000 per option.
show me photo of timing engine peugeot 206 rc