they are non-adjustable units That is true, but if there is sponginess in the pedal, there may be a leak in the SLAVE CYLINDER. The slave cylinder is not repairable and must be replaced as a whole unit. It is mounted to the drivers' side of the transmission. The unit is opearated when the clutch is pushed in. To check if the unit is low, check the resavoir that is under the hood next to the brake fluid/master cylinder. The cap on mine says to use DOT 3 brake fluid.
how to adjust a 95 dodge neon clutch? how to adjust a 95 dodge neon clutch?
No.No.
How do you replace a slave cylinder on a 1995 dodge neon clutch
were id the data link connector for a 1995 dodge dakota
Use 10w30 in a 1995 Dodge Dakota.
You can't adjust a clutch in a 95 Escort because it has a hydraulic clutch.
Where can I get a free copy of a 1995 Dodge Dakota Sport Owners Manual
Yes, but you will have to use your 1995 intake.
how much cost to change a clutch for a geo prizm 1995
Yes. A 3.9 v6 engine from a 1995 Dodge Dakota will fit into a 2000 Dodge Dakota with a 3.9 v6 engine. You will have to swap the intake and exhaust manifolds along with all sensors and fuel rail though.
There is no difference in a 1995 dodge dakota with a 3.9 v6 engine and a 2000 dodge dakota with a 3.9 v6 engine and you can exchange the newer engine with the older one.
No, Dodge does not use inertia/reset switches.