Drum brakes are meant to self adjust when applying the brake in reverse, however you can access the adjuster from the back side of the brake plate through a rubber grommet, it is hard to see but in there there is a little gear looking thing that you can manually turn with a flathead screwdriver to adjust the brake pads. If access is too difficult then you will have to remove the drum to get at it, im thinking that once you get in there you will find that it is pretty dirty which is causing the adjusters not to work, and the shoes are worn as well.
In fact it' a 1993 festiva standard. How put off old plates on front discs braques?tancks!Constant
brakes adjust themselves automatically
Turn the Idle Adjusting screw.
are you serious? upgrade brakes swap mercury capri xr2 turbo drivetrain upgrade brakes upgrade brakes
Brakes are adjusted automatically
https://www.youtube.com/watch?v=tb1ul7yZ3FU The above decribes how to adjust the brakes on the ford 2000, 3000, and 5000 tractors.
Is your PCV valve working okay?
Engine, not motor... there is a difference. The engine in the 1993 Ford Festiva/Kia Pride/Mazda 121 was the fuel injected 1.3 liter Mazda B3 engine.
no, two different suspension system specifications.
Ford Festiva was created in 1986.
You have drum brakes on the rear.
How do I adjust my emergency brakes on my 1999 ford expidition?