How do you adjust the clutch on an erf ecx?

Answer 1

Assuming it has the sixteen speed Eaton box it will have a twin plate clutch. Measure the gap from the between the release bearing and the front of the gearbox, it should be 13mm, i use a 1/2" ext. To adjust it you need to turn the engine until you can see a removable locking plate held in with a 9/16" headed bolt. remove this plate and with the clutch pushed down you can turn the inner ring, there is a proper tool but you can do it with a small strong bar. Remeasure it with the pedal released, turn the ring clockwise to decrease the gap. When the locking tab is getting to point where is almost proud of the castellations on the inner ring it is time to change the clutch.

If it has the zf gearbox there is no adjustment.

Answer 2

How do I adjust my clutch on my erf ec10 8 speed box

Answer 3

How to adjust clutch pedal of erf truck

Answer 4

How adjust the erf truck clutch pedal

Answer 5

H