The majority of time if you adjust the rear brakes it will adjust the park brake.
I have a manual 96 Mazda Protege, with the parking break located behind the shifter. The adjustment bolt is located right next to the parking break on the left side (drivers side) of the parking break handle. you will have to remove the rubber cover around the parking break shaft in order to see the bolt.
Underneath the 1995 Chevy 1500, the cables from the real wheels connect to the cable from the brake pedal. The connection has an adjustment bolt that when tightened will make the brakes tighter.
The 1995 Nissan 240 emergency brake has an adjustment screw on the brake pad. Turn the adjustment screw to adjust the brake height.
They are self adjusting. Some sdjust when backing up and hitting the brakes and some by using the parking brake. You can also adjust them by removing the rear drums.
how do we adjust hand brakes
DOT3
It is self-adjusting, normally.
behind the engine on the firewall
back wheels.
First make sure rear service brakes are adjusted properly There should be a small nut located at the side of the emergency brake handle (may have to remove plastic trim to access) Set brake to 3 clicks and wheels should be locked at that position
Put your foot on the brake, pu the car into drive and the parking break should disengage. if not, push on the parking break while holding the break in drive.
iT CAN BE WIRING OR BAD HEADLIGHT SWITCH.